Tuesday, January 5, 2010

Cheap Paddle Wheel Boats For Sale Why Are Paddle Wheel Electric Generating Setups Not Used On All Our Rivers And Streams In The USA?

Why are paddle wheel electric generating setups not used on all our rivers and streams in the USA? - cheap paddle wheel boats for sale

They are not clean, continuous, inexpensive, requires no dams and produce their power at any point, so reducing transmission costs. They were able to exercise equipment for the health needs, the energy can be fitted to add.

4 comments:

tinkerta... said...

would without a dam, power generation be so low that the return on investment is not very attractive.

PhilC said...

If you put a paddle in a river and nothing else to turn in relation to the shaft, the impeller is fairly easy.

However, when connecting a generator to the other end of the shaft, which is now a major driving force to the wheels. To get electricity, the water must be treated so as to concentrate on the movement of the impeller, and it must have a sufficient change in the height (or head) between input and output to ensure that the rudder.

Even then, the energy transfer from water to the generator is quite inefficient, it is better to redesign the wheel in turbine blades a better job of extracting energy from water.

And you must make sure that the wheels do not hurt, do not reduce the wildlife in the water and plant and animal life in the water cling to the base to stop or turn the wheel.

It should not only that, but the flow of water to remain fairly constant, or expires after hours or whenys or weeks, if not create the wheel electricity. Typically, for a dam to keep the "" the flow of water to use for the generator. And then, all water related activities are likely to complain of inadequate supply.

So for the moment, all technical and environmental concerns to address to the end, it ends with relatively little energy, a significant cost for the installation. So all water-supply shop, the local water supply, there is enough energy to achieve a reasonable return on investment.

Of course, increasing the cost of traditional sources continue, the economic balance and the sources of change that is justified, perhaps, the most recent May, but by far the balance is very favorable to the traditional sources.

PhilC said...

If you put a paddle in a river and nothing else to turn in relation to the shaft, the impeller is fairly easy.

However, when connecting a generator to the other end of the shaft, which is now a major driving force to the wheels. To get electricity, the water must be treated so as to concentrate on the movement of the impeller, and it must have a sufficient change in the height (or head) between input and output to ensure that the rudder.

Even then, the energy transfer from water to the generator is quite inefficient, it is better to redesign the wheel in turbine blades a better job of extracting energy from water.

And you must make sure that the wheels do not hurt, do not reduce the wildlife in the water and plant and animal life in the water cling to the base to stop or turn the wheel.

It should not only that, but the flow of water to remain fairly constant, or expires after hours or whenys or weeks, if not create the wheel electricity. Typically, for a dam to keep the "" the flow of water to use for the generator. And then, all water related activities are likely to complain of inadequate supply.

So for the moment, all technical and environmental concerns to address to the end, it ends with relatively little energy, a significant cost for the installation. So all water-supply shop, the local water supply, there is enough energy to achieve a reasonable return on investment.

Of course, increasing the cost of traditional sources continue, the economic balance and the sources of change that is justified, perhaps, the most recent May, but by far the balance is very favorable to the traditional sources.

billruss... said...

You are not entitled to a paddle, without a dam to control water.

Look at all the factories in the 1800s, while were the operation of mills and factories of the day, because it was the only source of power. Visit one of the sites in New England maintained. All are in the large dams and canals.

.

Post a Comment